Hardin Marine

1/16" x 3/4" Cotter Pin - Stainless
Your Price:
$1.49

1/16" x 3/4" Cotter Pin - Stainless

620-29139

1/16" x 3/4" Cotter Pin - Stainless

Bend prongs outward to secure. Also known as split pins, they have one prong slightly longer than the other so they’re easy to open.

Type 316 and 18-8 stainless steel may be mildly magnetic. Type 316 pins are more corrosion resistant than 18-8 stainless steel pins.


3300 Maxflex Extreme Cable

Starting From:
$43.99
This Part has options, please click the button below to order.

3300C / 33C Maxflex Extreme Cable

620-630 + Option(s)

3300C / 33C Maxflex Extreme Cable

This is the new evolution of cable design with the very latest in construction technology from the aerospace industry The ultra slippery acetal liner surrounded by a high density HDPE casing that allows the all stainless steel cable to operate smoother, bend tighter, and all with less loss of motion than ever before. High Density Jacket Housing is 0.35" (9mm) Diameter.

  • Perfect for long complex cable routing.
  • Superior feel and smoothness from its efficiency
  • More responsive to tight tolerance applications.
  • Commonly used as a throttle cable, trim indicator cable and used on Jacuzzi jet drives 

Type 33C have 10-32 threaded ends


4300BC Bulkhead Cable Maxflex Extreme

Starting From:
$108.99
This Part has options, please click the button below to order.

4300BC Bulkhead Cable Maxflex Extreme

620-460 + Option(s)

4300BC Bulkhead Maxflex Extreme

These extremely heavy duty cables are recommended for heavy use and high operating loads The cables use all of our latest technology, from the acetal liner to their high density jacket Even the bulk head versions use an all stainless steel bulkhead and hardware. High Density Jacket Housing is 0.43" (11mm) Diameter. Replaces Morse 38013-000 cables. Used on Berkeley 12JC/G and American Turbine Dominator Jet Drives among others.

Type 43C have 1/4-28 threaded ends. 


4300C Cable Clamp Style Maxflex Extreme

Starting From:
$98.99
This Part has options, please click the button below to order.

4300C Cable Clamp Style Maxflex Extreme

620-650 + Option(s)

4300C Clamp Style Maxflex Extreme

These extremely heavy duty cables are recommended for heavy use and high operating loads The cables use all of our latest technology, from the acetal liner to their high density jacket. High Density Jacket Housing is 0.43" (11mm) Diameter. Replaces Morse 38012-000 cables. Used on Berkeley 12JE/F Jet Drives and in some shifter control applications.

Type 43C have 1/4-28 threaded ends.


Bearing Cap Seal Driver
Your Price:
$26.99

Bearing Cap Seal Driver

950-758500

Bearing Cap Seal Driver

This new jet pump seal & bushing driver simplifies the installation process of critical bowl bushings and various seals in the jet pump. The stainless driver shaft is threaded and interchangeable with all the drivers.


Berkeley / Dominator Bellhousing Adapter With Strap
Your Price:
$279.99

Berkeley / Dominator Bellhousing Adapter With Strap

620-10001

Berkeley / Dominator Bellhousing Adapter With Strap

This adapter is used on most  Borg Warner bellhousings with a 6 bolt pattern to adapt to a 3 point jet drive application with a standard jet H-Bar 1310 driveline. 5" deep and fits a 4-7/8" rubber bearing cap mount ring.

Berkeley Jet Drive T-Shirt



Your Price:
$19.99

Berkeley Jet Drive T-Shirt

620-170 + Option(s)

Berkeley Jet Drive T-Shirt

Super premium screen printed, pre-shrunk, 100% cotton. Large design is printed on the back with a Berkeley Jet Drive Logo emblem on the left chest.

Available in Large, X-Large and XX-Large


Bowl Bushing Driver
Your Price:
$35.99

Bowl Bushing Driver

950-758200

Bowl Bushing Driver

This new jet pump seal & bushing driver simplifies the installation process of critical bowl bushings and various seals in the jet pump. The stainless driver shaft is threaded and interchangeable with all the drivers.


Bowl Seal Driver
Your Price:
$32.99

Bowl Seal Driver

950-758400

Bowl Seal Driver

This new jet pump seal & bushing driver simplifies the installation process of critical bowl bushings and various seals in the jet pump. The stainless driver shaft is threaded and interchangeable with all the drivers.


Brass 43C Cable Attaching Pivot, 1/4" Shaft
Your Price:
$12.99

Brass 43C Cable Attaching Pivot, 1/4" Shaft

620-29140

Brass 43C Cable Attaching Pivot, 1/4" Shaft, 3/8" Shaft Length, 1/4-28 thread

This brass pivot is designed to thread onto your 43C jet boat shift control. Uses a 1/16" cotter pin. (Not Included)


Complete Jet Pump Repair Tool Kit
Your Price:
$489.99

Complete Jet Pump Repair Tool Kit

950-758999

Complete Jet Pump Repair Tool Kit

This kit is great for the do-it-yourselfer or the pro repair shop. Kit includes heavy duty impeller puller, pump seal drivers, splined shaft socket and impeller nut socket. Do the job the easy way "with the right tool for the job!"

Kit Includes:


Fastener Kit for "SS" & "XS" Loader Scoops
Your Price:
$13.99

Fastener Kit for "SS" & "XS" Loader Scoops

620-103120

Fastener Kit for "SS" & "XS" Loader Scoops - 5/16"-18 thread socket head bolts


Interchangeable Driver Shaft
Your Price:
$27.99

Interchangeable Driver Shaft

950-758600

Interchangeable Driver Shaft (fits all 4 drivers 950-758200 thru 950-758500

This new jet pump seal & bushing driver simplifies the installation process of critical bowl bushings and various seals in the jet pump. The stainless driver shaft is threaded and interchangeable with all the drivers.


Jet Boat Cable Kit

Starting From:
$359.99
This Part has options, please click the button below to order.

Jet Boat Cable Kit

620-1000 + Option(s)

Now is the time to re-cable your jet boat at an affordable price! This complete cable kit includes Rack or Rotary Cable Steering System, 3300C throttle cable, 4300BC Shift cables (or 4300C / 3300C for different pumps), helm, rack and dash bezel. Available in common lengths only. Click here for how to measure for replacement steering cable. Throttle and shift cables are measured end to end.

Jet H-Bar 1350 Driveline
Your Price:
$439.99

Jet H-Bar 1350 Driveline

500-0845

Jet H-Bar 1350 Driveline

  • Overall Length: 8-1/8"
  • Spline Shaft: 1-3/8"
  • Flange Mount: 2-3/8" x 2-7/8"
  • Uses 7/16-20 bolts.

This unit bolts to the PTO flange. Used for heavy duty jet H-bar for 600 horsepower and up.
Note: The overall length does not include the PTO flange which is and additional one inch thick.

Need help choosing your new driveshaft? Check out this handy tutorial!


Jet Impeller Nut Socket
Your Price:
$119.99

Jet Impeller Nut Socket

950-758900

Jet Impeller Nut Socket

This special wrench fits over end of the pump shaft to loosen and tighten the impeller nut - 1/2" square drive fits all common tools.


Jet Pump Impeller Puller
Your Price:
$159.99

Jet Pump Impeller Puller

950-758100

Jet Pump Impeller Puller

New impeller puller for Berkeley, American Turbine, Legend, Aggressor, and other similar impellers. Use of a standard 2 or 3 jaw automotive puller can easily beak the impeller casting. This new impeller puller fits and captures the entire snout surface. This results in an even 360 degree pull and greatly reduces the possibility of breakage.


LS1 14mm PTO 1310 Adapter Bolt Kit
Your Price:
$89.99

LS PTO 1310 Adapter Bolt Kit

500-2156

LS PTO 1310 Adapter Bolt Kit

This is a special metric bolt kit for 1310 LS PTO's.

Contains (6) M11x1.5x31 Bolts and (4) 3/8"-24 x 1" bolts


LS1 14mm PTO 1310 Adapter Bolt Kit
Your Price:
$89.99

LS PTO 1310 Adapter Long Bolt Kit

500-2160

LS PTO 1310 Adapter Bolt Kit

This is a special metric long bolt kit for 1310 LS PTO's. See additional info below for fitment.

Contains (6) M11x1.5x44 Bolts and (4) 3/8"-24 x 1" bolts


LS1 14mm PTO 1310 Adapter Bolt Kit
Your Price:
$89.99

LS PTO 1350 Adapter Long Bolt Kit

500-2162

LS PTO 1350 Adapter Bolt Kit

This is a special metric long bolt kit for 1350 LS PTO's. See additional info below for fitment.

Contains (6) M11x1.5x44 Bolts and (4) 7/16" x 1" bolts


LS1 PTO 1350 Adapter Bolt kit
Your Price:
$89.99

LS PTO 1350 Adapter Bolt kit

500-2158

LS PTO 1350 Adapter Bolt kit

Contains (6) M11x1.5x31 Bolts and (4) 7/16"x1" bolts


Mounting Plate for 151-1200 Trim Switch
Your Price:
$9.99

Mounting Plate for 151-1200 Trim Switch

151-1225

Mounting Plate for 151-1200 Trim Switch

Plate and 4 screws for mounting a 151-1200 Trim Switch to most steering wheels.


Polished 43C Cable Seal
Your Price:
$33.99

Polished 43C Cable Seal

125-57520

This is the perfect way to seal that diverter control cable.

These beautiful polished billet aluminum cable seals use a 1/2" NPTmale thread toadapt them and a sure fit rubber compression seal for reliability.


Power Take Off Adapter - 455 Olds 1310 Flexplate
Your Price:
$199.99

Power Take Off Adapter - 455 Olds 1310 Flexplate

500-2085

Power Take Off Adapters - 455 Olds 1310 Flexplate

Uses 3/8-24 bolts on 2" x 2-3/8" centers

These flanges bolt on the flywheel and accept 1310 spicer drivelines.  There are many more available, just call us. These power take offs are needed when attaching your drive shaft to your engine.

Need help choosing your new PTO flange? Check out this handy tutorial!


Power Take Off Adapter - 455 Olds 1350 Flexplate
Your Price:
$199.99

Power Take Off Adapter - 455 Olds 1350 Flexplate

500-2090

Power Take Off Adapters - 455 Olds 1350 Flexplate

Uses 7/16-20 bolts on 2-3/8" x 2-7/8" centers

These flanges bolt on the flywheel and accept 1350 spicer drivelines.  There are many more available, just call us. These power take offs are needed when attaching your drive shaft to your engine.

Need help choosing your new PTO flange? Check out this handy tutorial!


Power Take Off Adapter - 460 Ford 1310 Flexplate
Your Price:
$189.99

Power Take Off Adapter - 460 Ford 1310 Flexplate

500-2060

Power Take Off Adapters - 460 Ford 1310 Flexplate

Uses 3/8-24 bolts on 2" x 2-3/8" centers

These flanges bolt on the flywheel and accept 1310 spicer drivelines.  There are many more available, just call us. These power take offs are needed when attaching your drive shaft to your engine.

Need help choosing your new PTO flange? Check out this handy tutorial!


Power Take Off Adapter - 460 Ford 1350 Flexplate
Your Price:
$189.99

Power Take Off Adapter - 460 Ford 1350 Flexplate

500-2065

Power Take Off Adapters - 460 Ford 1350 Flexplate

Uses 7/16-20 bolts on 2-3/8" x 2-7/8" centers

These flanges bolt on the flywheel and accept 1350 spicer drivelines.  There are many more available, just call us. These power take offs are needed when attaching your drive shaft to your engine.

Need help choosing your new PTO flange? Check out this handy tutorial!