If your Calgo Steering Kit is in need or a rebuild, we can help This service includes checking all parts , servicing the helm and replacing the cables. NOTE: This requires you to mail your parts in for service.

For: 1/8" cable systems.

If your Calgo Steering Kit is in need or a rebuild, we can help This service includes checking all parts , servicing the helm and replacing the cables. NOTE: This requires you to mail your parts in for service.

For: 3/16" cable systems.

Uflex Rotary Steering System Packaged in a Box - Non Reversible

With a patented spring clutch that Accura eliminates continuous loads on the steering wheel while the direction of the boat is not being actively changed, which is highly recommended for outboard and sterndrives without power assist. The T73FC helm included with the Accura package also features a Planetary Gear Design for smooth and more balanced steering effort. A direct drop in replacement for competing systems, the Accura comes with the M66 Universal Rotary Steering Cable with stainless steel output fittings for maximum longevity and smooth steering. A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). The wheel is not included. Click here for how to measure for replacement cable

This kit includes:

• T73NR FC - helm
• X34 - 90° bezel (diameter is 5 1/8")
• M66 - steering cable

Features and Technical Specifications:

• Cable Entry can be set from either Port or Starboard sides
• Fast connect, simple installation
• All stainless steel cable output ends
• Corrosion resistant materials
• Particularly suitable where clearance is limited
• Optional 90° or 20° installation
• Standard 3/4” tapered shaft
• Lock-to-lock steering wheel turns: approx. 3,8
• Stroke: 9” (228 mm)
• Maximum allowable steering wheel diameter: 16” (406 mm)
• Minimum steering cable bend radius: 7.9” (200 mm)
• Minimal feedback
• Compact for mounting
• T71FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat.
• For boats faster than 50 mph the twin cable steering system T72FC is recommended
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards

Uflex Dual Cable Rotary Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). Featuring the T71FC helm with a Planetary Gear Design, the Rotech reduces steering effort and delivers more balanced loads on the steering wheel. This unique design also offers a wider wear area which reduces lost motion and improves durability. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct “drop in” replacement for competing system; requiring no new holes for installation. The Rotech package also includes the M66 universal Rotary Steering Cable with stainless steel output fittings for maximum longevity and smooth steering. Click here for how to measure for replacement cable.

This kit includes:

• T72FC - helm
• X34 - 90° bezel (diameter is 5 1/8")
• M66 -  2 steering cables

Features and Technical Specifications:

• Cable Entry can be set from either Port or Starboard sides
• Fast connect, simple installation
• All stainless steel cable output ends
• Corrosion resistant materials
• Particularly suitable where clearance is limited
• Optional 90° or 20° installation
• Standard 3/4” tapered shaft
• Lock-to-lock steering wheel turns: approx. 3,8
• Stroke: 9” (228 mm)
• Maximum allowable steering wheel diameter: 16” (406 mm)
• Minimum steering cable bend radius: 7.9” (200 mm)
• Minimal feedback
• Compact for mounting
• T71FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat.
• For boats faster than 50 mph the twin cable steering system T72FC is recommended
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards

Uflex Non-Reversible Rack and Pinion Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). Recommended for outboard applications or non power assisted sterndrives where there is limited space behind the dash, the Accutech features a patented spring clutch of the G88NR helm eliminates continuous loads while not actively changing direction. The M86 cable included with the Accutech has an armor wrapped stainless steel core for maximum efficiency and minimal lost motion. Click here for how to measure for replacement cable.

This kit includes:

• M86 - preassembled helm with steering cable
• G86NR - shaft assembly
• X34 - 90° bezel (diameter is 5 1/8")

Features and Technical Specifications:

• All stainless steel cable output ends
• Made exclusively in corrosion resistant materials
• Optional 90° or 20° installation
• Standard 3/4”tapered shaft
• Lock-to-lock steering wheel turns: 3,5
• Stroke: 8.2” (210 mm)
• Maximum allowable steering wheel diameter: 16.5” (420 mm)
• Minimum steering cable bend radius: 7,9” (200 mm)
• G86 steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards

Now is the time to re-cable your jet boat at an affordable price! This complete cable kit includes Rack or Rotary Cable Steering System, 3300C throttle cable, 4300BC Shift cables (or 4300C / 3300C for different pumps), helm, rack and dash bezel. Available in common lengths only. Click here for how to measure for replacement steering cable. Throttle and shift cables are measured end to end.

Uflex Rotary Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). Featuring the T71FC helm with a Planetary Gear Design, the Rotech reduces steering effort and delivers more balanced loads on the steering wheel. This unique design also offers a wider wear area which reduces lost motion and improves durability. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct “drop in” replacement for competing system; requiring no new holes for installation. The Rotech package also includes the M66 universal Rotary Steering Cable with stainless steel output fittings for maximum longevity and smooth steering. Click here for how to measure for replacement cable.

This kit includes:

• T71FC - helm
• X34 - 90° bezel (diameter is 5 1/8")
• M66 - steering cable

Features and Technical Specifications:

• Cable Entry can be set from either Port or Starboard sides
• Fast connect, simple installation
• All stainless steel cable output ends
• Corrosion resistant materials
• Particularly suitable where clearance is limited
• Optional 90° or 20° installation
• Standard 3/4” tapered shaft
• Lock-to-lock steering wheel turns: approx. 3,8
• Stroke: 9” (228 mm)
• Maximum allowable steering wheel diameter: 16” (406 mm)
• Minimum steering cable bend radius: 7.9” (200 mm)
• Minimal feedback
• Compact for mounting
• T71FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat.
• For boats faster than 50 mph the twin cable steering system T72FC is recommended
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards

Uflex Rack and Pinion Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). The wheel is not included. Click here for how to measure for replacement cable.

This kit includes:

• M86 - pre assembled helm with steering cable
• G86 - shaft assembly
• X34 - 90° bezel (diameter is 5 1/8")

Features and Technical Specifications:

• All stainless steel cable output ends
• Made exclusively in corrosion resistant materials
• Optional 90° or 20° installation
• Standard 3/4”tapered shaft
• Lock-to-lock steering wheel turns: 3,5
• Stroke: 8.2” (210 mm)
• Maximum allowable steering wheel diameter: 16.5” (420 mm)
• Minimum steering cable bend radius: 7,9” (200 mm)
• G86 steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards

Hydraulic Place Diverter System for Berkeley 12JC, JG, JB & American Turbine

This kit provides the freedom of instant control with the flip of a switch. This unit travels its full range in approximately 2 seconds, and due to its hydraulic operation it is infinitely adjustable Each kit comes complete with a hydraulic diverter assembly, hydraulic pump, wiring harness, switch, and all necessary hydraulic fittings and lines.

Low-Profile Place Diverter Berkeley System for 12JC, JG, JB

This system was designed to solve the problem that occurs in limited clearance applications such as swim step interference by eliminating the vertical loop in the reverse cable and re-routing the cable in a horizontal shape out of the transom.
Requires the use of a 43C style of shift cable.

Rubber Mount

For use with Berkeley Bearing Cap and three point mount system