Berkeley Jet Drive

Berkeley Jet Transom Housing Seal Kit

This kit is all the items needed to install your transom housing for correct sealing /p>

This kit includes:

• 1 Bowl O-Ring #S13731
• 1 Rubber Transom Gasket #S13166
• 1 Steering Tube Cushion #S13531
• 1 Reverse Cable Grommet #S09488

Transom Housing, 0 Degrees To 9 Degrees

Transom Housing, 9 Degrees To 18 Degrees (Standard)

Water Pipe Retainer

Wedge Bolt Kit

This bolt kit is used for new droop snoot installations that include a 2 or 4 degree wedge.  The comes with all stainless hardware, nozzle gaskets and everything else you need to do the job right.

Includes:

• 2 Nozzle Gaskets
• 4 1.25" Bolts
• 4 1.50" Bolts
• 4 1.75" Bolts
• 8 Lock Washers

Wing Nut

Woodruff Key

Hand Hole Wrench Fastener

#10 Lock washer

.015 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.235-7.237

Each Berkeley wear ring is constructed from seamless stainless steel.  By using a seamless wear ring Berkeley can CNC machine these wear rings to exacting tolerances.  These wear rings are not stepped so that there is no water deflection to the impeller.

.030 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.220-7.222

Each Berkeley wear ring is constructed from seamless stainless steel.  By using a seamless wear ring Berkeley can CNC machine these wear rings to exacting tolerances.  These wear rings are not stepped so that there is no water deflection to the impeller.

.045 Undersized Stainless Steel Wear Ring - I.D. Installed is 7.205-7.207

Each Berkeley wear ring is constructed from seamless stainless steel.  By using a seamless wear ring Berkeley can CNC machine these wear rings to exacting tolerances.  These wear rings are not stepped so that there is no water deflection to the impeller.

1/4" Lock Washer

1/8" NPT Oil Plug, Sold each.

12J Hand Hole Cover

This fits the 12JE and 12JF Model pumps

Reverse Bucket

12JF Steering Extension, overall 9" length

The veins on this bowl have been modified on the inlet to smooth and stabilize the water entry into the bowl the outlet veins are modified increasing exit velocity for less turbulence and straighter flow entering the nozzle This is a must for the lake racer or any serious competitor. This item is prepped to order and takes 5-7 business days before it ships.

12JI Pump Kit WithHydraulic Place Diverter Nozzle And Transom Assembly (With Exchange)

This pump is the latestevolution of the family of Berkeley Jets With over a million pumps soldwe've used our knowledge to develop the All New Berkeley 12JI Pump.

This pump begins its construction with a supertough, high strength aluminum alloy 356T alloy casting the strongest mostserviceable aerospace material around Then each unit is CNC machined,hard anodized, and powder coated "Berkeley White™".

Each unit is assembled using only thefinest in stainless steel hardware, but its what's inside that counts.Starting with Berkeley's unique single stage mixed flow impeller thatproduces maximum thrust per horsepower. The 12JI Pump also incorporates aspecial trimming device allowing you to adjust your boat's attitude whileunderway through the use of a manual control. A hydraulic control isoptional.

The 12JI Pump is sold as a pump only forreplacement of inferior copy pumps or just a tired original Berkeley unit.

You can now take advantage of the factory to consumer special allowing you to trade in your old pump for credit towards the All New Berkeley 12JI.

12JI Pump Kit With Manual Place Diverter & Transom Assembly (With Exchange)

This pump is the latest evolution of the family of Berkeley Jets With over a million pumps sold we've used our knowledge to develop the All New Berkeley 12JI Pump.

This pump begins its construction with a super tough, high strength aluminum alloy 356T alloy casting the strongest most serviceable aerospace material around Then each unit is CNC machined, hard anodized, and powder coated "Berkeley White™".

Each unit is assembled using only the finest in stainless steel hardware, but its what's inside that counts. Starting with Berkeley's unique single stage mixed flow impeller that produces maximum thrust per horsepower. The 12JI Pump also incorporates a special trimming device allowing you to adjust your boat's attitude while underway through the use of a manual control. A hydraulic control is optional.

The 12JI Pump is sold as a pump only for replacement of inferior copy pumps or just a tired original Berkeley unit.

You can now take advantage of the factory to consumer special allowing you to trade in your old pump for credit towards the All New Berkeley 12JI.