• 16" Stroke.
• Overall Length Closed is 22-3/8".
• Strong eyelet mount allows a wide range of angles for easy installation.
• Marine grade stainless steel housing
• Sealed precision die cast housing.
• 12 VDC
• Safe working dynamic load limit of 400 lbs.*
• Static Limit of 500 lbs.*
• Heavy duty, sealed ball bearing motor allows for locking of hatches, won’t open at high speeds
  
• NOTE: Please verify your dimensions. Actuators that have been installed are NON returnable!

*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage. Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.

• Marine grade stainless steel & aluminum construction
• 12 DC sealed electric motors, 2-wire simple hook-ups
• Compact Size, Light Weight, for Maximum Lifting Capacity
• Two Standard Length Cylinders with Simple Pin Mounts
• Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer
• Smooth Quiet Responsive Hydraulic Action with No-Coasting
• Moving Capacity 500 lbs. on horizontal surface. Will lift 250lb hatch when mounted vertically.
• 1” Cylinder. 
• System is virtually maintenance free
• Operating Temperatures 10 to 165 Degrees F
• System can Operate with Environmentally Responsible Fluid
• 18" Model  Dimensions: 26” Retracted Length, 44” Extended Length.
• NOTE: The 620-920016 is only bracket kit that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator. 

For Mercury 3-cylinder 40 hp 4-stroke outboards (serial number 1C049739 and above). See your owner’s manual for replacement schedule. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years.  Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries.  It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

• Provides cooling water to your outboard engine
• Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your Mercury 4-stroke outboard.
• Impeller elastomers provide improved flexibility across broad temperature ranges throughout the boating season
• Designed for durability to provide higher flow rates and cooling flow to protect your engine
• Center insert resists tearing to ensure performance

• Marine grade stainless steel & aluminum construction.
• 12 DC sealed electric motors, 2-wire simple hook-ups.
• Compact Size, Light Weight, for Maximum Lifting Capacity.
• Two Standard Length Cylinders with Simple Pin Mounts.
• Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer.
• Smooth Quiet Responsive Hydraulic Action with No-Coasting.
• Moving Capacity 500 lbs. on horizontal surface. Will lift 250 lb hatch when mounted vertically.
• 1” Cylinder. 
• System is virtually maintenance free.
• Operating Temperatures 10 to 165 Degrees F.
• System can Operate with Environmentally Responsible Fluid.
• 24" Model Dimensions: 32” Retracted Length, 56” Extended Length.
• NOTE: The 620-920016 is only bracket that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator. 

• 4" Stroke.
• Overall Length Closed is 11-7/8".
  
• Strong eyelet mount allows a wide range of angles for easy installation.
• Marine grade stainless steel housing
• Sealed precision die cast housing.
• 12 VDC
• Safe working dynamic load limit of 400 lbs.*
• Static Limit of 500 lbs.*
• Heavy duty, sealed ball bearing motor allows for locking of hatches, won’t open at high speeds
  
• NOTE: Please verify your dimensions. Actuators that have been installed are NON returnable!

*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage. Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.

Replaces OE# 93317-428U7-00

For Mercury Optimax 75 hp through 115 hp outboards and Mercury 4-stroke 75 hp through 15 hp outboards. See your owner’s manual for replacement schedule. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years.  Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries.  It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

• Provides cooling water to your outboard engine
• Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your Mercury 4-stroke outboard.
• Impeller elastomers provide improved flexibility across broad temperature ranges throughout the boating season
• Designed for durability to provide higher flow rates and cooling flow to protect your engine
• Center insert resists tearing to ensure performance

For Mercury Optimax 75 hp through 115 hp outboards and Mercury 4-stroke 75 hp through 15 hp outboards. See your owner’s manual for replacement schedule. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years.  Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries.  It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

• Provides cooling water to your outboard engine
• Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your Mercury 4-stroke outboard.
• Impeller elastomers provide improved flexibility across broad temperature ranges throughout the boating season
• Designed for durability to provide higher flow rates and cooling flow to protect your engine
• Center insert resists tearing to ensure performance

• 8" Stroke.
• Overall Length Closed is 15-7/8".
  
• Strong eyelet mount allows a wide range of angles for easy installation.
• Marine grade stainless steel housing
• Sealed precision die cast housing.
• 12 VDC
• Safe working dynamic load limit of 400 lbs.*
• Static Limit of 500 lbs.*
• Heavy duty, sealed ball bearing motor allows for locking of hatches, won’t open at high speeds
  
• NOTE: Please verify your dimensions. Actuators that have been installed are NON returnable!

*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage. Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.

FILTER Mercruiser 35-80365M

For 2005 and newer Mercury and Mariner 8 through 9.9 hp 4-stroke outboards.See your owner’s manual for replacement schedule. See your engine service manual for instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years.  Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries.  It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.

• Complete six-piece Water Pump Impeller Repair Kit
• Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your Mercury or Mariner 4-stroke outboard.
• Kit contains gaskets, plates, impeller, for easy installation with common tools
• Impeller elastomers provide improved flexibility across broad temperature ranges throughout the boating season
• Designed for durability to provide higher flow rates and cooling flow to protect your engine