Stainless Full Braided Line Kit for Hydraulic Place Diverter

These lines are 26" long. Will work will most Droop Snoot applications.

CP Performance has come up with the ultimate hydraulic line kit Features all stainless steel fittings and braided line from the hydraulic cylinder to the pump.

Stainless Steel  Braided Line Half Kit For Hydraulic Place Diverter

Place Diverter braided line kit features custom braided line on the outside of the boat only. This kit only replaces your outside lines and still uses your stock plastic lines inside. Hoses are 26" long and will work with most droop snoot installations.

BULK HEAD SEAL, HYD LINE

COOLING LINE BYPASS VALVE

REV. CABLE PACKER, HYDRAULIC LINE

4300BC / 43BC  Bulkhead Control Cable Maxflex Extreme

These extremely heavy duty cables are recommended for heavy use and high operating loads The cables use all of our latest technology, from the acetal liner to their high density jacket Even the bulk head versions use an all stainless steel bulkhead and hardware. High Density Jacket Housing is 0.43" (11mm) Diameter. Replaces Morse 38013-000 cables. Used on Berkeley 12JC/G and American Turbine Dominator Jet Drives among others.

Type 43C have 1/4-28 threaded ends. 

3300C / 33C Cable, Maxflex Extreme

This is the new evolution of cable design with the very latest in construction technology from the aerospace industry The ultra slippery acetal liner surrounded by a high density HDPE casing that allows the all stainless steel cable to operate smoother, bend tighter, and all with less loss of motion than ever before. High Density Jacket Housing is 0.35" (9mm) Diameter.

• Perfect for long complex cable routing.
• Superior feel and smoothness from its efficiency
• More responsive to tight tolerance applications.
• Commonly used as a throttle cable, trim indicator cable and used on Jacuzzi jet drives 
• Available from 5 to 30 feet.

Type 33C have 10-32 threaded ends

4300C / 43C Clamp Style Cable Maxflex Extreme

These extremely heavy duty cables are recommended for heavy use and high operating loads The cables use all of our latest technology, from the acetal liner to their high density jacket. High Density Jacket Housing is 0.43" (11mm) Diameter. Replaces Morse 38012-000 cables. Used on Berkeley 12JE/F Jet Drives and in some shifter control applications.

Type 43C have 1/4-28 threaded ends.

Hydraulic Place Diverter System for Berkeley 12JC, JG, JB & American Turbine

This kit provides the freedom of instant control with the flip of a switch. This unit travels its full range in approximately 2 seconds, and due to its hydraulic operation it is infinitely adjustable Each kit comes complete with a hydraulic diverter assembly, hydraulic pump, wiring harness, switch, and all necessary hydraulic fittings and lines.

Hydraulic Place Diverter Kit for Dominator (specify serial # and color when ordering)

This kit provides the freedom of instant control with the flip of a switchThis unit travels its full range in approximately 2 seconds, and due to itshydraulic operation it is infinitely adjustable Each kit comes complete with ahydraulic diverter assembly, hydraulic pump, wiring harness, switch, and allnecessary hydraulic fittings and lines.