Uflex Rotary Steering System Packaged in a Box

A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). Featuring the T71FC helm with a Planetary Gear Design, the Rotech reduces steering effort and delivers more balanced loads on the steering wheel. This unique design also offers a wider wear area which reduces lost motion and improves durability. Centered on the main drive shaft, this helm requires less room behind the dash and is a direct “drop in” replacement for competing system; requiring no new holes for installation. The Rotech package also includes the M66 universal Rotary Steering Cable with stainless steel output fittings for maximum longevity and smooth steering. Click here for how to measure for replacement cable.

This kit includes:

• T71FC - helm
• X34 - 90° bezel (diameter is 5 1/8")
• M66 - steering cable

Features and Technical Specifications:

• Cable Entry can be set from either Port or Starboard sides
• Fast connect, simple installation
• All stainless steel cable output ends
• Corrosion resistant materials
• Particularly suitable where clearance is limited
• Optional 90° or 20° installation
• Standard 3/4” tapered shaft
• Lock-to-lock steering wheel turns: approx. 3,8
• Stroke: 9” (228 mm)
• Maximum allowable steering wheel diameter: 16” (406 mm)
• Minimum steering cable bend radius: 7.9” (200 mm)
• Minimal feedback
• Compact for mounting
• T71FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat.
• For boats faster than 50 mph the twin cable steering system T72FC is recommended
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards

12JR Race Pump Only

If only the very ultimate pump is what you're looking for then this is it The 12JR Race Pump uses a severe duty 17-4 pump shaft, a lightened, balanced, and blueprinted stainless steel impeller, an inducer pre-loader impeller, and a double drilled bowl with a billet aluminum bowl stuffer. We then flow prep and clearance the assembly to race specifications and finish it off with a proven Berkeley Droop Snoot.

Berkeley Jet's stainless steel XB impeller is a fresh new design from the company that made jet drives famous. Produced using a lost wax precision casting method from high strength 17-4 stainless steel. Featuring a improved center entry cone from the shaft to the blades to reduce cavitation. This CNC machined impeller is factory balanced and has a wear ring surfaced machined at 7.225” to match a factory sized wear ring. Available in standard A and A2 cuts with other cuts available at additional cost.

Berkeley Jet's stainless steel XB impeller is a fresh new design from the company that made jet drives famous. Produced using a lost wax precision casting method from high strength 17-4 stainless steel. Featuring a improved center entry cone from the shaft to the blades to reduce cavitation. This CNC machined impeller is factory balanced and has a wear ring surfaced machined at 7.225” to match a factory sized wear ring. Available in standard A and A2 cuts with other cuts available at additional cost.

Berkeley Jet's stainless steel XB impeller is a fresh new design from the company that made jet drives famous. Produced using a lost wax precision casting method from high strength 17-4 stainless steel. Featuring a improved center entry cone from the shaft to the blades to reduce cavitation. This CNC machined impeller is factory balanced and has a wear ring surfaced machined at 7.225” to match a factory sized wear ring. Available in standard A and A2 cuts with other cuts available at additional cost.

Berkeley Jet's stainless steel XB impeller is a fresh new design from the company that made jet drives famous. Produced using a lost wax precision casting method from high strength 17-4 stainless steel. Featuring a improved center entry cone from the shaft to the blades to reduce cavitation. This CNC machined impeller is factory balanced and has a wear ring surfaced machined at 7.225” to match a factory sized wear ring. Available in standard A and A2 cuts with other cuts available at additional cost.

Berkeley Jet's stainless steel XB impeller is a fresh new design from the company that made jet drives famous. Produced using a lost wax precision casting method from high strength 17-4 stainless steel. Featuring a improved center entry cone from the shaft to the blades to reduce cavitation. This CNC machined impeller is factory balanced and has a wear ring surfaced machined at 7.225” to match a factory sized wear ring. Available in standard A and A2 cuts with other cuts available at additional cost.

Uflex Rotary Steering System Packaged in a Box - Non Reversible

With a patented spring clutch that Accura eliminates continuous loads on the steering wheel while the direction of the boat is not being actively changed, which is highly recommended for outboard and sterndrives without power assist. The T73FC helm included with the Accura package also features a Planetary Gear Design for smooth and more balanced steering effort. A direct drop in replacement for competing systems, the Accura comes with the M66 Universal Rotary Steering Cable with stainless steel output fittings for maximum longevity and smooth steering. A convenient kit form, especially suitable as replacement steering, that includes helm, bezel and cable. The cable is available in 1-ft increments from 8 to 20 feet (specify cable length when ordering). The wheel is not included. Click here for how to measure for replacement cable

This kit includes:

• T73NR FC - helm
• X34 - 90° bezel (diameter is 5 1/8")
• M66 - steering cable

Features and Technical Specifications:

• Cable Entry can be set from either Port or Starboard sides
• Fast connect, simple installation
• All stainless steel cable output ends
• Corrosion resistant materials
• Particularly suitable where clearance is limited
• Optional 90° or 20° installation
• Standard 3/4” tapered shaft
• Lock-to-lock steering wheel turns: approx. 3,8
• Stroke: 9” (228 mm)
• Maximum allowable steering wheel diameter: 16” (406 mm)
• Minimum steering cable bend radius: 7.9” (200 mm)
• Minimal feedback
• Compact for mounting
• T71FC steering systems are not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat.
• For boats faster than 50 mph the twin cable steering system T72FC is recommended
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards