|
|
|
|
|
|
|
|
|
All New Berkeley Pumps
NEW Complete Berkeley Jet Pump Models 12JE, 12JG, and 12JI
All Berkeley Jet Drives are manufactured from 356T Aluminum alloy and CNC machined to
Berkeley's stringent factory specs. Then each unit is military spec hard anodized and powder coated.
The infamous "Berkeley White™". All Berkeley pumps feature a stainless steel impeller shaft that
has the tail section hard chromed and precision ground ensuring the ultimate in long life. All
Berkeley pump bowls use an oil bath reservoir to lubricate the bowl bearings. Each pump is assembled with
all stainless steel hardware. These are just some of the features that have kept Berkeley the Leader
in the jet pump industry.
Berkeley Jet Pump Specifications:
- Mixed flow jet with single impeller
- Minimum horsepower 120hp at 4300 rpm
- Maximum horsepower 500hp with aluminum impeller
- Maximum horsepower unlimited with stainless impeller
- Flows up to 4,000 gallons per minute
- Maximum boat weight 5,000 lbs.
- Jet unit weighs approx. 100 lbs.
- Recommended engine 4, 6, or 8 cylinder gasoline powered
| Berkeley
Model 12 JI
|
This pump is the latest evolution of the family of Berkeley Jets. With over a million pumps sold we've
used our knowledge to develop the All New Berkeley 12JI Pump.
This pump begins its construction with a super tough,
high strength aluminum alloy 356T alloy casting the strongest
most serviceable aerospace material around. Then each unit
is CNC machined, hard anodized, and powder coated
"Berkeley White™".
Each unit is assembled using only the finest in stainless
steel hardware, but its what's inside that counts. Starting
with Berkeley's unique single stage mixed flow impeller
that produces maximum thrust per horsepower. The 12JI
Pump also incorporates a special trimming device allowing you
to adjust your boat's attitude while underway through the use of
a manual control. A hydraulic control is optional.
The 12JI Pump is sold as a pump only for replacement
of inferior copy pumps or just a tired original Berkeley unit.
You can now take advantage of the factory to
consumer special allowing you to trade in your old pump for
credit towards the All New Berkeley 12JI.
The 12JI is sold complete with a transom housing,
steering tube assembly, and a manual trim nozzle, with cable
and control.
|
Berkeley
Model 12JR Race Pump
|
"Start Original, Stay Original" - Making the best better again!
If only the very ultimate pump is what you're looking for then this is it. The 12JR Race Pump uses a severe
duty Aquamet pump shaft, a lightened, balanced, and blueprinted stainless steel impeller, a double drilled bowl with a
billet aluminum bowl stuffer then take and flow prep and clearance the assembly to race specifications and finish with
a proven Berkeley Droop Snoot.
|
Berkeley
Model 12JG Pump With Trimmable Nozzle Assembly |
Here is the complete pump, intake and transom
housing assembly for a new installation or a restoration
project. This will come with all bolts, gaskets, steering tube,
trim nozzle assembly, nozzle control cable, and floor
mount control.
| Part
No. |
Description |
| 150-B-07340-OEM
|
New Complete 12JG Pump with Trim Nozzle |
|
Berkeley
Model 12JE Pump With Trimmable Nozzle Assembly |
Here is the complete new pump with a trimmable
nozzle, nozzle control cable and a floor mount control. This
pump comes complete with a hardware mounting kit.
| Part
No. |
Description |
| 150-B-06578-OEM
|
New Complete 12JE Pump with Trim Nozzle |
|
Berkeley New Replacement Jet Pumps Only |
These pumps are new replacement pumps. These
pumps are sold less nozzle assembly so that you can use
your original nozzle. Each pump assembly includes all
gaskets and seals so they're ready to install when you get yours.
|
|
|
|